华企号 后端开发 MySQL8+keepalived一键部署

MySQL8+keepalived一键部署

概述

本次的文章会格外的长,网上大多的配置流程已经不可使用,本篇文章可以称为保姆级教程,而且通过shell脚本大大减少了部署mysql主从,双主的工作量。

img

如上图,VIP地址为192.168.10.100,如果主机192.168.10.129挂了,会自动切换到备机192.168.10.130上,由于是双主,数据可以进行同步恢复

部署流程大致为

  1. 192.168.10.129服务器上部署docker、mysql一主一丛
  2. 192.168.10.130服务器上部署docker、mysql一主一丛
  3. 192.168.10.129的Master1数据库和192.168.10.130的数据库互为主从
  4. 在两台服务器上安装keeplived形成高可用

部署流程

配置第一台Master

部署Master

准备Master配置文件my.cnf

mkdir /home/mysql_config
mkdir /home/mysql_config/master1
mkdir /home/mysql_config/master1/config
touch /home/mysql_config/master1/config/my.cnf
chmod +x /home/mysql_config/master1/config/my.cnf

cat > /home/mysql_config/master1/config/my.cnf <<EOF
[mysqld]
server_id=110
user=mysql
character-set-server=utf8mb4
collation-server=utf8mb4_general_ci
default-authentication-plugin=mysql_native_password
max_connections=800
max_connect_errors=1000

log_bin=mysql_binlog_master1
slow_query_log=ON
slow_query_log_file=/var/lib/mysql/slow.log

log_error=/var/lib/mysql/mysql.err
log_replica_updates=ON
enforce_gtid_consistency=ON
gtid_mode=ON

plugin-load="rpl_semi_sync_source=semisync_source.so;rpl_semi_sync_replica=semisync_replica.so"
#rpl_semi_sync_source_enabled=ON
#rpl_semi_sync_replica_enabled=ON

binlog-ignore-db=information_schema
binlog-ignore-db=mysql
binlog-ignore-db=sys
binlog-ignore-db=performance_schema

[client]
default-character-set=utf8mb4
EOF

运行Master

会自动下载最新版mysql

docker run -d --name mysql_master1 -p 3306:3306 -e MYSQL_ROOT_PASSWORD=admin123456 -e TZ="Asia/Shanghai" -v /home/mysql_config/master1/config:/etc/mysql/conf.d mysql --authentication_policy=mysql_native_password

启动半同步插件

此步主要是为了将#rpl_semi_sync_source_enabled=ON#rpl_semi_sync_replica_enabled=ON的井号去掉

mysql会检测semisync_source.sosemisync_replica.so插件的情况,如果没有安装就不能设置rpl_semi_sync_source_enabledrpl_semi_sync_replica_enabled

cat > /home/mysql_config/master1/config/my.cnf <<EOF
[mysqld]
server_id=110
user=mysql
character-set-server=utf8mb4
collation-server=utf8mb4_general_ci
default-authentication-plugin=mysql_native_password
max_connections=800
max_connect_errors=1000

log_bin=mysql_binlog_master1
slow_query_log=ON
slow_query_log_file=/var/lib/mysql/slow.log

log_error=/var/lib/mysql/mysql.err
log_replica_updates=ON
enforce_gtid_consistency=ON
gtid_mode=ON

plugin-load="rpl_semi_sync_source=semisync_source.so;rpl_semi_sync_replica=semisync_replica.so"
rpl_semi_sync_source_enabled=ON
rpl_semi_sync_replica_enabled=ON

binlog-ignore-db=information_schema
binlog-ignore-db=mysql
binlog-ignore-db=sys
binlog-ignore-db=performance_schema

[client]
default-character-set=utf8mb4
EOF

重新开启

docker restart mysql_master1
docker exec -it mysql_master1 mysql -uroot -padmin123456 -e "show variables like 'rpl_semi_sync_%';"
+---------------------------------------------+------------+
| Variable_name                               | Value      |
+---------------------------------------------+------------+
| rpl_semi_sync_replica_enabled               | ON         |
| rpl_semi_sync_replica_trace_level           | 32         |
| rpl_semi_sync_source_enabled                | ON         |
| rpl_semi_sync_source_timeout                | 10000      |
| rpl_semi_sync_source_trace_level            | 32         |
| rpl_semi_sync_source_wait_for_replica_count | 1          |
| rpl_semi_sync_source_wait_no_replica        | ON         |
| rpl_semi_sync_source_wait_point             | AFTER_SYNC |
+---------------------------------------------+------------+

部署Slave

准备Slave配置文件my.cnf

mkdir /home/mysql_config/slave1
mkdir /home/mysql_config/slave1/config
touch /home/mysql_config/slave1/config/my.cnf
chmod +x /home/mysql_config/slave1/config/my.cnf

cat > /home/mysql_config/slave1/config/my.cnf <<EOF
[mysqld]
server_id=120
user=mysql
character-set-server=utf8mb4
collation-server=utf8mb4_general_ci
default-authentication-plugin=mysql_native_password
max_connections=800
max_connect_errors=1000

log_bin=mysql_binlog_master1_slave1
slow_query_log=ON
slow_query_log_file=/var/lib/mysql/slow.log

log_error=/var/lib/mysql/mysql.err
log_replica_updates=ON     
enforce_gtid_consistency=ON
gtid_mode=ON

binlog-ignore-db=information_schema
binlog-ignore-db=mysql
binlog-ignore-db=sys
binlog-ignore-db=performance_schema

[client]
default-character-set=utf8mb4
EOF

运行Slave

会自动下载最新版mysql

docker run -d --name mysql_master1_slave1 -p 4306:3306 -e MYSQL_ROOT_PASSWORD=admin123456 -e TZ="Asia/Shanghai" -v /home/mysql_config/slave1/config:/etc/mysql/conf.d mysql --authentication_policy=mysql_native_password

主从配置

安装MySQL客户端

两台Master都需要安装,而且后续keepalived也需要安装

在网站查询https://dev.mysql.com/downloads/repo/yum/要安装的mysql版本,以mysql80-community-release-el8-4.noarch.rpm举例

yum module disable mysql
wget https://dev.mysql.com/get/mysql80-community-release-el8-4.noarch.rpm
rpm -ivh mysql80-community-release-el8-4.noarch.rpm
yum install mysql-community-client
yum module enable mysql

编写脚本文件

touch /home/mysql_config/mysql_script.sh
chmod +x /home/mysql_config/mysql_script.sh

cat > /home/mysql_config/mysql_script.sh <<'EOF'
#!/bin/bash
MASTER_RPL_USER=rpl_admin
MASTER_RPL_PASSWORD=rpl_admin123456
# master and slaves admin user
ADMIN_USER=root
ADMIN_PASSWORD=admin123456
ALLOW_HOST=%

MASTER_HOST=192.168.10.129
MASTER_PORT=3306
SLAVE_HOST=192.168.10.129
SLAVE_PORT=4306

# master
DROP_USER_SQL="DROP USER '$MASTER_RPL_USER'@'$ALLOW_HOST';"
CREATE_USER_SQL="CREATE USER '$MASTER_RPL_USER'@'$ALLOW_HOST' IDENTIFIED BY '$MASTER_RPL_PASSWORD';"
GRANT_PRIVILEGES_SQL="GRANT REPLICATION SLAVE ON *.* TO '$MASTER_RPL_USER'@'$ALLOW_HOST';"
FLUSH_PRIVILEGES_SQL="FLUSH PRIVILEGES;"

mysql -h$MASTER_HOST -P$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "$CREATE_USER_SQL"
mysql -h$MASTER_HOST -P$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "$GRANT_PRIVILEGES_SQL"
mysql -h$MASTER_HOST -P$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "$FLUSH_PRIVILEGES_SQL"

# master's slave shell
RESULT=`mysql -h$MASTER_HOST -p$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "SHOW MASTER STATUS;" | grep -v grep |tail -n +2| awk '{print $1,$2}'`
LOG_FILE_NAME=`echo $RESULT | grep -v grep | awk '{print $1}'`
LOG_FILE_POS=`echo $RESULT | grep -v grep | awk '{print $2}'`

SYNC_SQL="change master to master_host='$MASTER_HOST', master_port=$MASTER_PORT, master_user='$MASTER_RPL_USER',master_password='$MASTER_RPL_PASSWORD',master_log_file='$LOG_FILE_NAME',master_log_pos=$LOG_FILE_POS;"
START_SYNC_SQL="start REPLICA;"
STATUS_SQL="show REPLICA status\G;"

mysql -h$SLAVE_HOST -P$SLAVE_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$SYNC_SQL"
mysql -h$SLAVE_HOST -P$SLAVE_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$START_SYNC_SQL"
mysql -h$SLAVE_HOST -P$SLAVE_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$STATUS_SQL"
EOF

执行脚本并检查

sh /home/mysql_config/mysql_script.sh
*************************** 1. row ***************************
...
             Slave_IO_Running: Yes
            Slave_SQL_Running: Yes
...

配置第二台

部署Master

准备Master配置文件my.cnf

mkdir /home/mysql_config
mkdir /home/mysql_config/master2
mkdir /home/mysql_config/master2/config
touch /home/mysql_config/master2/config/my.cnf
chmod +x /home/mysql_config/master2/config/my.cnf

cat > /home/mysql_config/master2/config/my.cnf <<EOF
[mysqld]
server_id=111
user=mysql
character-set-server=utf8mb4
collation-server=utf8mb4_general_ci
default-authentication-plugin=mysql_native_password
max_connections=800
max_connect_errors=1000

log_bin=mysql_binlog_master2
slow_query_log=ON
slow_query_log_file=/var/lib/mysql/slow.log

log_error=/var/lib/mysql/mysql.err
log_replica_updates=ON
enforce_gtid_consistency=ON
gtid_mode=ON

plugin-load="rpl_semi_sync_source=semisync_source.so;rpl_semi_sync_replica=semisync_replica.so"
#rpl_semi_sync_source_enabled=ON
#rpl_semi_sync_replica_enabled=ON

binlog-ignore-db=information_schema
binlog-ignore-db=mysql
binlog-ignore-db=sys
binlog-ignore-db=performance_schema

[client]
default-character-set=utf8mb4
EOF

运行Master

会自动下载最新版mysql

docker run -d --name mysql_master2 -p 3306:3306 -e MYSQL_ROOT_PASSWORD=admin123456 -e TZ="Asia/Shanghai" -v /home/mysql_config/master2/config:/etc/mysql/conf.d mysql --authentication_policy=mysql_native_password

启用半同步插件

此步主要是为了将#rpl_semi_sync_source_enabled=ON#rpl_semi_sync_replica_enabled=ON的井号去掉

mysql会检测semisync_source.sosemisync_replica.so插件的情况,如果没有安装就不能设置rpl_semi_sync_source_enabledrpl_semi_sync_replica_enabled

cat > /home/mysql_config/master2/config/my.cnf <<EOF
[mysqld]
server_id=111
user=mysql
character-set-server=utf8mb4
collation-server=utf8mb4_general_ci
default-authentication-plugin=mysql_native_password
max_connections=800
max_connect_errors=1000

log_bin=mysql_binlog_master2
slow_query_log=ON
slow_query_log_file=/var/lib/mysql/slow.log

log_error=/var/lib/mysql/mysql.err
log_replica_updates=ON
enforce_gtid_consistency=ON
gtid_mode=ON

plugin-load="rpl_semi_sync_source=semisync_source.so;rpl_semi_sync_replica=semisync_replica.so"
rpl_semi_sync_source_enabled=ON
rpl_semi_sync_replica_enabled=ON

binlog-ignore-db=information_schema
binlog-ignore-db=mysql
binlog-ignore-db=sys
binlog-ignore-db=performance_schema

[client]
default-character-set=utf8mb4
EOF

重新开启

docker restart mysql_master2
docker exec -it mysql_master2 mysql -uroot -padmin123456 -e "show variables like 'rpl_semi_sync_%';"
+---------------------------------------------+------------+
| Variable_name                               | Value      |
+---------------------------------------------+------------+
| rpl_semi_sync_replica_enabled               | ON         |
| rpl_semi_sync_replica_trace_level           | 32         |
| rpl_semi_sync_source_enabled                | ON         |
| rpl_semi_sync_source_timeout                | 10000      |
| rpl_semi_sync_source_trace_level            | 32         |
| rpl_semi_sync_source_wait_for_replica_count | 1          |
| rpl_semi_sync_source_wait_no_replica        | ON         |
| rpl_semi_sync_source_wait_point             | AFTER_SYNC |
+---------------------------------------------+------------+

部署Slave

准备Slave配置文件my.cnf

mkdir /home/mysql_config/slave2
mkdir /home/mysql_config/slave2/config
touch /home/mysql_config/slave2/config/my.cnf
chmod +x /home/mysql_config/slave2/config/my.cnf

cat > /home/mysql_config/slave2/config/my.cnf <<EOF
[mysqld]
server_id=121
user=mysql
character-set-server=utf8mb4
collation-server=utf8mb4_general_ci
default-authentication-plugin=mysql_native_password
max_connections=800
max_connect_errors=1000

log_bin=mysql_binlog_master2_slave2
slow_query_log=ON
slow_query_log_file=/var/lib/mysql/slow.log

log_error=/var/lib/mysql/mysql.err
log_replica_updates=ON     
enforce_gtid_consistency=ON
gtid_mode=ON

binlog-ignore-db=information_schema
binlog-ignore-db=mysql
binlog-ignore-db=sys
binlog-ignore-db=performance_schema

[client]
default-character-set=utf8mb4
EOF

运行Slave

会自动下载最新版mysql

docker run -d --name mysql_master2_slave2 -p 4306:3306 -e MYSQL_ROOT_PASSWORD=admin123456 -e TZ="Asia/Shanghai" -v /home/mysql_config/slave2/config:/etc/mysql/conf.d mysql --authentication_policy=mysql_native_password

主从配置

安装MySQL客户端

两台Master都需要安装,而且后续keepalived也需要安装

在网站查询https://dev.mysql.com/downloads/repo/yum/要安装的mysql版本,以mysql80-community-release-el8-4.noarch.rpm举例

yum module disable mysql
wget https://dev.mysql.com/get/mysql80-community-release-el8-4.noarch.rpm
rpm -ivh mysql80-community-release-el8-4.noarch.rpm
yum install mysql-community-client
yum module enable mysql

编写脚本文件

touch /home/mysql_config/mysql_script.sh
chmod +x /home/mysql_config/mysql_script.sh

cat > /home/mysql_config/mysql_script.sh <<'EOF'
#!/bin/bash
MASTER_RPL_USER=rpl_admin
MASTER_RPL_PASSWORD=rpl_admin123456
# master and slaves admin user
ADMIN_USER=root
ADMIN_PASSWORD=admin123456
ALLOW_HOST=%

MASTER_HOST=192.168.10.130
MASTER_PORT=3306
SLAVE_HOST=192.168.10.130
SLAVE_PORT=4306

# master
DROP_USER_SQL="DROP USER '$MASTER_RPL_USER'@'$ALLOW_HOST';"
CREATE_USER_SQL="CREATE USER '$MASTER_RPL_USER'@'$ALLOW_HOST' IDENTIFIED BY '$MASTER_RPL_PASSWORD';"
GRANT_PRIVILEGES_SQL="GRANT REPLICATION SLAVE ON *.* TO '$MASTER_RPL_USER'@'$ALLOW_HOST';"
FLUSH_PRIVILEGES_SQL="FLUSH PRIVILEGES;"

mysql -h$MASTER_HOST -P$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "$CREATE_USER_SQL"
mysql -h$MASTER_HOST -P$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "$GRANT_PRIVILEGES_SQL"
mysql -h$MASTER_HOST -P$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "$FLUSH_PRIVILEGES_SQL"

# master's slave shell
RESULT=`mysql -h$MASTER_HOST -p$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "SHOW MASTER STATUS;" | grep -v grep |tail -n +2| awk '{print $1,$2}'`
LOG_FILE_NAME=`echo $RESULT | grep -v grep | awk '{print $1}'`
LOG_FILE_POS=`echo $RESULT | grep -v grep | awk '{print $2}'`

SYNC_SQL="change master to master_host='$MASTER_HOST', master_port=$MASTER_PORT, master_user='$MASTER_RPL_USER',master_password='$MASTER_RPL_PASSWORD',master_log_file='$LOG_FILE_NAME',master_log_pos=$LOG_FILE_POS;"
START_SYNC_SQL="start REPLICA;"
STATUS_SQL="show REPLICA status\G;"

mysql -h$SLAVE_HOST -P$SLAVE_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$SYNC_SQL"
mysql -h$SLAVE_HOST -P$SLAVE_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$START_SYNC_SQL"
mysql -h$SLAVE_HOST -P$SLAVE_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$STATUS_SQL"
EOF

执行脚本并检查

sh /home/mysql_config/mysql_script.sh
*************************** 1. row ***************************
...
             Slave_IO_Running: Yes
            Slave_SQL_Running: Yes
...

双主配置

Master1作为主,Master2作为备份

Master1的IP地址为:192.168.10.129
Master2的IP地址为:192.168.10.130

安装MySQL客户端

两台Master都需要安装,而且后续keepalived也需要安装

在网站查询https://dev.mysql.com/downloads/repo/yum/要安装的mysql版本,以mysql80-community-release-el8-4.noarch.rpm举例

yum module disable mysql
wget https://dev.mysql.com/get/mysql80-community-release-el8-4.noarch.rpm
rpm -ivh mysql80-community-release-el8-4.noarch.rpm
yum install mysql-community-client
yum module enable mysql

编写配置文件

touch /home/mysql_config/rplShell.sh
chmod +x /home/mysql_config/rplShell.sh

cat > /home/mysql_config/rplShell.sh <<'EOF'
#!/bin/bash
MASTER_RPL_USER=rpl_admin
MASTER_RPL_PASSWORD=rpl_admin123456
# master and slaves admin user
ADMIN_USER=root
ADMIN_PASSWORD=admin123456

MASTER_HOST=192.168.10.130
MASTER_PORT=3306
BACKUP_HOST=192.168.10.129
BACKUP_PORT=3306

RESULT=`mysql -h$MASTER_HOST -P$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "SHOW MASTER STATUS;" | grep -v grep |tail -n +2| awk '{print $1,$2}'`
LOG_FILE_NAME=`echo $RESULT | grep -v grep | awk '{print $1}'`
LOG_FILE_POS=`echo $RESULT | grep -v grep | awk '{print $2}'`

SYNC_SQL="change master to master_host='$MASTER_HOST', master_port=$MASTER_PORT, master_user='$MASTER_RPL_USER',master_password='$MASTER_RPL_PASSWORD',master_log_file='$LOG_FILE_NAME',master_log_pos=$LOG_FILE_POS;"
START_SYNC_SQL="start REPLICA;"
STATUS_SQL="show REPLICA status\G;"

mysql -h$BACKUP_HOST -P$BACKUP_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$SYNC_SQL"
mysql -h$BACKUP_HOST -P$BACKUP_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$START_SYNC_SQL"
mysql -h$BACKUP_HOST -P$BACKUP_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$STATUS_SQL"
EOF

执行脚本并检查

sh /home/mysql_config/rplShell.sh
*************************** 1. row ***************************
...
             Slave_IO_Running: Yes
            Slave_SQL_Running: Yes
...

Master2作为主,Master1作为备份

Master1的IP地址为:192.168.10.129
Master2的IP地址为:192.168.10.130

安装MySQL客户端

两台Master都需要安装,而且后续keepalived也需要安装

在网站查询https://dev.mysql.com/downloads/repo/yum/要安装的mysql版本,以mysql80-community-release-el8-4.noarch.rpm举例

yum module disable mysql
wget https://dev.mysql.com/get/mysql80-community-release-el8-4.noarch.rpm
rpm -ivh mysql80-community-release-el8-4.noarch.rpm
yum install mysql-community-client
yum module enable mysql

编写配置文件

touch /home/mysql_config/rplShell.sh
chmod +x /home/mysql_config/rplShell.sh

cat > /home/mysql_config/rplShell.sh <<'EOF'
#!/bin/bash
MASTER_RPL_USER=rpl_admin
MASTER_RPL_PASSWORD=rpl_admin123456
# master and slaves admin user
ADMIN_USER=root
ADMIN_PASSWORD=admin123456

MASTER_HOST=192.168.10.129
MASTER_PORT=3306
BACKUP_HOST=192.168.10.130
BACKUP_PORT=3306

RESULT=`mysql -h$MASTER_HOST -P$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "SHOW MASTER STATUS;" | grep -v grep |tail -n +2| awk '{print $1,$2}'`
LOG_FILE_NAME=`echo $RESULT | grep -v grep | awk '{print $1}'`
LOG_FILE_POS=`echo $RESULT | grep -v grep | awk '{print $2}'`

SYNC_SQL="change master to master_host='$MASTER_HOST', master_port=$MASTER_PORT, master_user='$MASTER_RPL_USER',master_password='$MASTER_RPL_PASSWORD',master_log_file='$LOG_FILE_NAME',master_log_pos=$LOG_FILE_POS;"
START_SYNC_SQL="start REPLICA;"
STATUS_SQL="show REPLICA status\G;"

mysql -h$BACKUP_HOST -P$BACKUP_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$SYNC_SQL"
mysql -h$BACKUP_HOST -P$BACKUP_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$START_SYNC_SQL"
mysql -h$BACKUP_HOST -P$BACKUP_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$STATUS_SQL"
EOF

执行脚本并检查

sh /home/mysql_config/rplShell.sh
*************************** 1. row ***************************
...
             Slave_IO_Running: Yes
            Slave_SQL_Running: Yes
...

配置Keepalived

Master1主机配置

安装keepalived

yum install -y keepalived

编写keepalived配置文件

cat > /etc/keepalived/keepalived.conf <<'EOF'
! Configuration File for keepalived

global_defs {
    router_id HA-M1
    script_user root
}

vrrp_script chk_mysql {
    script /etc/keepalived/chk_mysql.sh
    interval 3
    fall 3
    rise 2
}

vrrp_instance VI_MYSQL {
    state MASTER
    interface ens160
    virtual_router_id 100
    priority 100
    advert_int 1
    unicast_src_ip  192.168.10.129
    unicast_peer {
            192.168.10.130
    }
    
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    
    virtual_ipaddress {
        192.168.10.100/24 dev ens160 label ens160:vip
    }
    
    track_script {
        chk_mysql
    }
}
EOF
  • router_id:标识,两台需不一样
  • state MASTER:表明这台是Master角色
  • priority:优先级,MASTER角色比BACKUP高
  • virtual_router_id:虚拟路由编号,两台需要一致,两个节点不能一样
  • 192.168.10.100 dev ens32 label ens32:vip:VIP地址—192.168.10.100
  • script /etc/keepalived/chk_mysql.sh:MySQL的检测脚本,定时去检测MySQL进程是否挂掉,会重启,interval是为间隔时间(2s检测一次)

当Keepalived从BACKUP提升为MASTER时,那么VIP就会漂移到自己身上,这个时候我们只需要将Slave挂载在自己身上即可

MySQL状态监测脚本

安装MySQL客户端

在网站查询https://dev.mysql.com/downloads/repo/yum/要安装的mysql版本,以mysql80-community-release-el8-4.noarch.rpm举例

wget https://dev.mysql.com/get/mysql80-community-release-el8-4.noarch.rpm
rpm -ivh mysql80-community-release-el8-4.noarch.rpm
yum module disable mysql
yum install mysql-community-client
yum module enable mysql

配置Keepalived的MySQL状态监测脚本

touch /etc/keepalived/chk_mysql.sh
chmod +x /etc/keepalived/chk_mysql.sh

cat > /etc/keepalived/chk_mysql.sh <<'EOF'
#!/bin/bash
MYSQL=/usr/bin/mysql
MYSQL_HOST=192.168.10.129
MYSQL_USER=root
MYSQL_PASSWORD=admin123456
CHECK_TIME=3
  
#mysql  is working MYSQL_OK is 1 , mysql down MYSQL_OK is 0
  
MYSQL_OK=1
  
function check_mysql_helth (){
    $MYSQL -h $MYSQL_HOST -u$MYSQL_USER -p${MYSQL_PASSWORD} -e "show status;" >/dev/null 2>&1
    if [ $? = 0 ] ;then
    MYSQL_OK=1
    else
    MYSQL_OK=0
    fi
    return $MYSQL_OK
}
while [ $CHECK_TIME -ne 0 ]
do
    let "CHECK_TIME -= 1"
    check_mysql_helth
if [ $MYSQL_OK = 1 ] ; then
    CHECK_TIME=0
    exit 0
fi
if [ $MYSQL_OK -eq 0 ] &&  [ $CHECK_TIME -eq 0 ]
then
    systemctl stop keepalived
    exit 1
fi
sleep 1
done
EOF

Master2备机配置

安装keepalived

yum install -y keepalived

编写keepalived配置文件

cat > /etc/keepalived/keepalived.conf <<'EOF'
! Configuration File for keepalived

global_defs {
    router_id HA-M2
    script_user root
}

vrrp_script chk_mysql {
    script /etc/keepalived/chk_mysql.sh
    interval 3
    fall 3
    rise 2
}

vrrp_instance VI_MYSQL {
    state BACKUP
    interface ens160
    virtual_router_id 100
    nopreempt
    priority 50
    advert_int 1
    unicast_src_ip  192.168.10.130
    unicast_peer {
            192.168.10.129
    }
    
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    
    virtual_ipaddress {
        192.168.10.100/24 dev ens160 label ens160:vip
    }
    
    track_script {
        chk_mysql
    }
}
EOF

注意router_id需要不一样,state BACKUP表明是备机,virtual_router_id需要一致,priority要比MASTER低!

chk_mysql.sh内容如下,可以看到可以根据当前Keepalived的状态分别处理,但是此处的处理都是启动MySQL(如果MySQL进程已退出)

MySQL状态监测脚本

安装MySQL客户端

在网站查询https://dev.mysql.com/downloads/repo/yum/要安装的mysql版本,以mysql80-community-release-el8-4.noarch.rpm举例

wget https://dev.mysql.com/get/mysql80-community-release-el8-4.noarch.rpm
rpm -ivh mysql80-community-release-el8-4.noarch.rpm
yum module disable mysql
yum install mysql-community-client
yum module enable mysql

配置Keepalived的MySQL状态监测脚本

touch /etc/keepalived/chk_mysql.sh
chmod +x /etc/keepalived/chk_mysql.sh

cat > /etc/keepalived/chk_mysql.sh <<'EOF'
#!/bin/bash
MYSQL=/usr/bin/mysql
MYSQL_HOST=192.168.10.130
MYSQL_USER=root
MYSQL_PASSWORD=admin123456
CHECK_TIME=3
  
#mysql  is working MYSQL_OK is 1 , mysql down MYSQL_OK is 0

MYSQL_OK=1
  
function check_mysql_helth (){
    $MYSQL -h $MYSQL_HOST -u$MYSQL_USER -p${MYSQL_PASSWORD} -e "show status;" >/dev/null 2>&1
    if [ $? = 0 ] ;then
    MYSQL_OK=1
    else
    MYSQL_OK=0
    fi
    return $MYSQL_OK
}
while [ $CHECK_TIME -ne 0 ]
do
    let "CHECK_TIME -= 1"
    check_mysql_helth
if [ $MYSQL_OK = 1 ] ; then
    CHECK_TIME=0
    exit 0
fi
if [ $MYSQL_OK -eq 0 ] &&  [ $CHECK_TIME -eq 0 ]
then
    systemctl stop keepalived
    exit 1
fi
sleep 1
done
EOF

启动Keepalived

最后在Master1和Master2分别启动Keepalived

systemctl start keepalived

查看Master1网络配置

ifconfig
ens160: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.10.129  netmask 255.255.255.0  broadcast 192.168.10.255
        inet6 fe80::20c:29ff:fe23:aab2  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:23:aa:b2  txqueuelen 1000  (Ethernet)
        RX packets 4797  bytes 524410 (512.1 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2860  bytes 332307 (324.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens160:vip: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.10.100  netmask 255.255.255.255  broadcast 0.0.0.0
        ether 00:0c:29:23:aa:b2  txqueuelen 1000  (Ethernet)

查看Master2网络配置

ens160: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.10.130  netmask 255.255.255.0  broadcast 192.168.10.255
        inet6 fe80::20c:29ff:feb4:3ede  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:b4:3e:de  txqueuelen 1000  (Ethernet)
        RX packets 4672  bytes 2048171 (1.9 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2703  bytes 275576 (269.1 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

主机上有ens160:vip而备机上没有vip

Keepalived可能会遇到的问题

  1. 主机能启动,备机不能启动
    1. 关闭防火墙
    2. 两台机器的网卡uuid是否冲突(如果是vm ware复制的linux,因为网卡uuid一致导致的)
  2. 主机和备机keepalived都为master,有两种方法
    • 关闭防火墙,或设置组播ip可用
    • 两端keepalived设置为单播(使用unicast_src_ip )

测试

数据同步测试

进入Master1,创建数据库test_db,表test_user,并插入一条数据。

docker exec -it mysql_master1 mysql -uroot -padmin123456 -e "CREATE DATABASE test_db;"
docker exec -it mysql_master1 mysql -uroot -padmin123456 -e "CREATE TABLE test_db.test_user (id INT(11),name VARCHAR(25),age int(11) );"
docker exec -it mysql_master1 mysql -uroot -padmin123456 -e "INSERT INTO test_db.test_user values (1,'zhangsan',18);"
docker exec -it mysql_master1 mysql -uroot -padmin123456 -e "SELECT * FROM test_db.test_user;"

查看Master1及从库master1_slave1、 查看Master2及从库master2_slave2的数据同步情况

docker exec -it mysql_master1 mysql -uroot -padmin123456 -e "SELECT * FROM test_db.test_user;"
+------+----------+------+
| id   | name     | age  |
+------+----------+------+
|    1 | zhangsan |   18 |
+------+----------+------+

docker exec -it mysql_master1_slave1 mysql -uroot -padmin123456 -e "SELECT * FROM test_db.test_user;"
+------+----------+------+
| id   | name     | age  |
+------+----------+------+
|    1 | zhangsan |   18 |
+------+----------+------+

docker exec -it mysql_master2 mysql -uroot -padmin123456 -e "SELECT * FROM test_db.test_user;"
+------+----------+------+
| id   | name     | age  |
+------+----------+------+
|    1 | zhangsan |   18 |
+------+----------+------+

docker exec -it mysql_master2_slave2 mysql -uroot -padmin123456 -e "SELECT * FROM test_db.test_user;"
+------+----------+------+
| id   | name     | age  |
+------+----------+------+
|    1 | zhangsan |   18 |
+------+----------+------+

高可用测试

启用备机测试

停止主机上的mysql

docker stop mysql_master1

主机上的Keepalived状态

Keepalived[4213]: Stopping
Keepalived_vrrp[4214]: (VI_MYSQL) sent 0 priority
Keepalived_vrrp[4214]: (VI_MYSQL) removing VIPs.

备机的Keepalived状态

Keepalived_vrrp[8986]: (VI_MYSQL) Backup received priority 0 advertisement
Keepalived_vrrp[8986]: (VI_MYSQL) Receive advertisement timeout
Keepalived_vrrp[8986]: (VI_MYSQL) Entering MASTER STATE
Keepalived_vrrp[8986]: (VI_MYSQL) setting VIPs.
Keepalived_vrrp[8986]: (VI_MYSQL) Sending/queueing gratuitous ARPs on ens160 for 192.168.10.100

注意
Master备机上做写操作,第一次写会发生半同步等待(10s左右),第二次写会退化成异步复制

主机恢复测试

启动主机上的mysql和keepalived

docker start mysql_master1
systemctl start keepalived

主机上的Keepalived状态

Keepalived_vrrp[5413]: (VI_MYSQL) Entering BACKUP STATE
Keepalived_vrrp[5413]: VI_MYSQL: sending gratuitous ARP for 192.168.10.129
Keepalived_vrrp[5413]: Sending gratuitous ARP on ens160 for 192.168.10.129
Keepalived_vrrp[5413]: (VI_MYSQL) received lower priority (50) advert from 192.168.10.130 - discarding
Keepalived_vrrp[5413]: (VI_MYSQL) received lower priority (50) advert from 192.168.10.130 - discarding
Keepalived_vrrp[5413]: (VI_MYSQL) received lower priority (50) advert from 192.168.10.130 - discarding
Keepalived_vrrp[5413]: (VI_MYSQL) Receive advertisement timeout
Keepalived_vrrp[5413]: (VI_MYSQL) Entering MASTER STATE
Keepalived_vrrp[5413]: (VI_MYSQL) setting VIPs.
Keepalived_vrrp[5413]: (VI_MYSQL) Sending/queueing gratuitous ARPs on ens160 for 192.168.10.100
Keepalived_vrrp[5413]: Sending gratuitous ARP on ens160 for 192.168.10.100
Keepalived_vrrp[5413]: Sending gratuitous ARP on ens160 for 192.168.10.100
Keepalived_vrrp[5413]: Sending gratuitous ARP on ens160 for 192.168.10.100
Keepalived_vrrp[5413]: Sending gratuitous ARP on ens160 for 192.168.10.100
Keepalived_vrrp[5413]: Sending gratuitous ARP on ens160 for 192.168.10.100


备机的Keepalived状态

Keepalived_vrrp[8986]: (VI_MYSQL) Master received advert from 192.168.10.129 with higher priority 100, ours 50
Keepalived_vrrp[8986]: (VI_MYSQL) Entering BACKUP STATE
Keepalived_vrrp[8986]: (VI_MYSQL) removing VIPs.

结论

如果杀掉主机上的mysql

  • VIP会漂移到备机上,ifconfig能看到VIP信息
  • 备机的Keepalived从BACKUP状态转换为了MASTER状态
  • Master备机上做写操作,第一次写会发生半同步等待(10s左右),第二次写会退化成异步复制

恢复主机mysql

  • ifconfig看下VIP会漂移回来,并且备机上的VIP会消失
  • 刚才在Master备机上写入的数据同步过来了
  • Keepalived的状态是从FAULT转变为BACKUP,最后变成MASTER

作者: 华企网通王鹏程序员

我是程序员王鹏,热爱互联网软件开发和设计,专注于大数据、数据分析、数据库、php、java、python、scala、k8s、docker等知识总结。 我的座右铭:"业精于勤荒于嬉,行成于思毁于随"
上一篇
下一篇

发表回复

联系我们

联系我们

028-84868647

在线咨询: QQ交谈

邮箱: tech@68v8.com

工作时间:周一至周五,9:00-17:30,节假日休息

关注微信
微信扫一扫关注我们

微信扫一扫关注我们

关注微博
返回顶部